Description
SDT206 Smoke Leak Detector
Dual test modes: no need to buy additional air compressor.
Air mode: Turning on the air mode allows you to determine if there is a leak in the pipe by introducing air into the pipeline. With the SDT206 Automotive Smoke Leak Detector, there is no need to purchase additional air compressors or air pumps, making your diagnostics easy and cost-effective.
Smoke Mode: After determining that there is a leak in a pipe, turning on Smoke Mode can help you quickly locate the leak.
Visual flow meter & adjustable flow meter knob
Smoke output flow: 0-6L/min, flow meter and adjustable knob, easy to observe and operate.
Quick leak diagnosis by pressure display
No leaks: if the value of the pressure gauge remains the same, it means there is no leak in the pipeline system.
Small leak: if the value of the pressure gauge drops a bit, it indicates a small leak in the pipeline system.
Serious leak: if the pressure gauge reaches zero, it indicates a large leak in the pipeline system.
Visual level gauge and handy drain outlet
Overheat and anti-freeze protection:
Support 12V car battery only.
How to do leak detection?
Fill 10ml-20ml test oil into the smoke leak detector.
Open the pipe that needs to be connected to the leak detector.
Install the universal airbag adapter to the sealed pipeline and connect it to the unit\’s smoke duct.
Connect the detector to the car’s DC12V battery, and it starts to work.
Turn on the Air mode. Check if there is a leak through the pressure gauge with the state of no smoke output.
After determining that there is a leak in the pipeline, please turn off the Air mode.
Under the premise of being well-sealed, the pipeline can be filled with smoke in about 1 min. If there is a leak, it can be easily located within 2~3 min.
